Jetson Orin BaseboardΒΆ Getting started guide Collect the hardware 1. Jetson SoM 2. Power supply 3. Storage 4. Cooling module 5. Fastening bolts 6. Host PC 7. Cabling Build your setup 1. Install the cooling module 2. Install the SoM 3. Install the storage 4. Apply power supply 5. Connect the debug console 6. Connect the flashing interface Flash the BSP image 1. Get the BSP image 2. Install dependencies 3. Disable auto-mounting 4. Enter recovery mode 5. Open debug console 6. Flash the board 7. Login Board overview IO map Power 1. DC Connector 2. Power over Ethernet 3. USB-C Power Delivery USB-C Power Delivery controller configuration External SPI Flash programmer TPS65988-config tool from Jetson Orin user space TPS65988-config tool via the debug console interface port Mechanics Revision changelog 1.3.4 1.3.0 1.1.6 Last update: 2026-04-18