COM Express 7 baseboardΒΆ Introduction Block diagram IO map Power Available interfaces and features Mechanics Getting started guide Collect the hardware 1. COM Express 7 SoM 2. RAM modules 3. Power supply 4. Fastening bolts 5. Micro SD card 6. Host PC 7. SD card reader 8. Cabling Flash the SD card with system image 1. Download a pre-built snapshot 2. Write the BSP image to the SD card Build your setup 1. Install the RAM modules 2. Install the SoM 3. Insert micro SD card 4. Select boot source 5. Connect the Ethernet port. 6. Connect the debug console Flash the BSP image 1. Open debug console 2. Apply power 3. Flash to eMMC 4. Login 5. Finalize configuration Power supply Power input connectors Auto startup Power sequence Power indicator LEDs Supply monitoring Peripherals Selection jumpers Fan control Board temperature measurement SFI / KR 10GbE on backplane connector GPIO Expanders Pinouts Backplane connector (J16) Fan connector (J9, J10, J11) Last update: 2025-12-11